Printer Forums

Printer Forums - Printing Help and Support > Printer Forums > Inkjet / Toner / Refills > reset ink pad counter

Reply
Thread Tools Display Modes

reset ink pad counter

 
 
Juan Carlos
Guest
Posts: n/a

 
      11-03-2004, 05:08 PM
I have an old Epson Stylus color 460. How can I reset the ink pad counter?

When I put the printer on all lights begin blinking.

Thanks

Charlie from Forli Italy


 
Reply With Quote
 
 
 
 
tomcas
Guest
Posts: n/a

 
      11-04-2004, 12:16 AM
Juan Carlos wrote:
> I have an old Epson Stylus color 460. How can I reset the ink pad counter?
>
> When I put the printer on all lights begin blinking.
>
> Thanks
>
> Charlie from Forli Italy
>
>

This procedure works on a 740. According to the 460 service manual they
are very similar.
Turn the power OFF. Press and hold the Load/Eject and Cleaning buttons
while you tun ON the power. Release both buttons when the Paper Out LED
is flashing. Press and hold the Cleaning button for at least 10 seconds.
If that fails here is a link to download free software that can also
reset the counter.
http://ssclg.com/epsone.shtml
Where is Forli?
 
Reply With Quote
 
 
 
 
Arthur Entlich
Guest
Posts: n/a

 
      11-04-2004, 10:34 AM
I believe the 460 and the 440 are the same models (just different
numbers based upon where they were sold)

I have the following sequence for the 440 model:

To set the printer into EEPROM management mode:

With printer OFF hold down Load/Eject+Cleaning buttons, while holding
press the ON SWITCH

This Enters the EEPROM Reset mode. (The Load/Eject LED blinks for a few
seconds.)

To Reset the EEPROM:

While the Load/Eject LED is blinking (for about 2 seconds), press down
the Cleaning switch for 10 seconds.

After 10 seconds, both Bk and CMY ink LEDs come ON simultaneously.

Confirming the both LEDs are ON, release the Cleaning switch. The
printer automatically starts initialization operation to reset the
specified addresses in the EEPROM

Once your printer has completed the initialization process, turn it off
via the power button.

When you next need to turn it on, it should function normally.


Keep in mind that if the ink pads are full, and you reset them without
replacement the ink could leak from the bottom of the printer.

Art


Juan Carlos wrote:
> I have an old Epson Stylus color 460. How can I reset the ink pad counter?
>
> When I put the printer on all lights begin blinking.
>
> Thanks
>
> Charlie from Forli Italy
>
>


 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Reset Epson R200 Waste Ink Pad Counter? Michael Redman Epson 0 06-13-2005 11:31 PM
Epson CX3650 - how to reset ink pad counter Olek Epson 5 04-15-2005 10:38 AM
Internal Waste Ink Pad Counter problem with Epson C20SX Fluffy Penguin Epson 1 10-25-2004 10:10 AM
Epson C64 Protection Counter (Waste Ink Counter) Solution Santos L. Halper Epson 0 07-06-2004 01:28 AM
Canon-ink reset counter john Canon 0 09-19-2003 01:37 AM