Canon Pixma mg7170 service mode

Joined
Nov 13, 2014
Messages
2
Please help me to enter service mode of canon pixma mg7170. have this dread code 5B00 error (ink absorber is full). Or help me remove this error. Have tried all the procedures explained at various site. Press resume....power...etc etc
Thnaks!! To make matter worse this has printer a touch screen menu
 
Last edited:
Joined
Dec 16, 2014
Messages
2
How are you, I am from Iraq to assist you
I work in the field of repair Inkjet Printers
If you encounter other problems, please news
You need the service tool v 4200



Service mode
Printers
Turn off the printer power
Press and hold the power switch
Now press the OK button on the site
I'll show you all buttons
Press 5 times to resume / cancel button
Leave now the power button
After this printer in service mode
 
Last edited:
Joined
Nov 13, 2014
Messages
2
Thanks canonbasra . Have tested every version (including v 3600) . does not work error 006. Beside i don't have v 4200. "Press 5 times to resume / cancel button" <-- in my case 5 times leads to the frozen orange warning light. 6 times to frozen power light . Only 4 times leads to service mode . Printer was working fine till the ink absorber final lock down.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top