Vista-Lexmark USB Communication Failure

Hi,

I have an HP Desktop PC that has had a Lexmark X3650 All-In-One (no
wireless) attached via USB for almost a year now without problem. The P
has auto Windows Update and an HP driver update switched on.
On either 26/11/09 or 27/11/09 the PC had done a windows Update an
reboot. My next attempt to print on 27/11/09 was met with a "Canno
Communicate" error, the print queue shows the request with no status
The printer icon shows as offline.
Here's what I've tried:
Reboot the PC, power off/on the printer, disconnect/reconnect the US
cable, check other devices work on that USB port and cable, print tes
page from printer menus OK, print photos OK from PictBridge an
flashdrive/SD cards on printer. Tried the front USB port on th
printer.
As there was no difference in comms, I downloaded a cleanup utility an
the latest driver from Lexmark, ran the cleanup (reboot) and started th
driver install. At the point where the install requires connection o
the USB cable I connected the cable and... nothing.
I tried other USB ports and cables but the PC does not recognise tha
the printer has been plugged in.
I tried the Windows Fix-It utility that checks the spooler etc., i
reported no problems.
I rolled back to before the dates above unsing Windows Restore but n
improvement, infact when I boot now I get a FaxMan error and Printe
Device error, presumably because of the failed re-installation of th
Lexmark drivers.

Can anyone suggest what to try next? Is my printer USB fried or is i
Vista simply not playing ball

--
Castagnol
Posted via http://www.vistaheads.co

1. Try another USB device on the same port that the printer was on. Does
the 'other' device work?

2. Try the Lexmark printer on another PC (ask a friend if you only have the
single PC). Does it work?

Now you should have a clearer idea about where the problem lies.
--
Cari (MS-MVP)
Windows Technologies - Printing & Imaging
http://www.coribright.com/windows


"Castagnola" <> wrote in
message news:...
>
> Hi,
>
> I have an HP Desktop PC that has had a Lexmark X3650 All-In-One (not
> wireless) attached via USB for almost a year now without problem. The PC
> has auto Windows Update and an HP driver update switched on.
> On either 26/11/09 or 27/11/09 the PC had done a windows Update and
> reboot. My next attempt to print on 27/11/09 was met with a "Cannot
> Communicate" error, the print queue shows the request with no status.
> The printer icon shows as offline.
> Here's what I've tried:
> Reboot the PC, power off/on the printer, disconnect/reconnect the USB
> cable, check other devices work on that USB port and cable, print test
> page from printer menus OK, print photos OK from PictBridge and
> flashdrive/SD cards on printer. Tried the front USB port on the
> printer.
> As there was no difference in comms, I downloaded a cleanup utility and
> the latest driver from Lexmark, ran the cleanup (reboot) and started the
> driver install. At the point where the install requires connection of
> the USB cable I connected the cable and... nothing.
> I tried other USB ports and cables but the PC does not recognise that
> the printer has been plugged in.
> I tried the Windows Fix-It utility that checks the spooler etc., it
> reported no problems.
> I rolled back to before the dates above unsing Windows Restore but no
> improvement, infact when I boot now I get a FaxMan error and Printer
> Device error, presumably because of the failed re-installation of the
> Lexmark drivers.
>
> Can anyone suggest what to try next? Is my printer USB fried or is it
> Vista simply not playing ball?
>
>
> --
> Castagnola
> Posted via http://www.vistaheads.com
>

Hi,

I tried a camera, a mobile phone, a mouse and a PDA in the USB port,
all of which worked once Vista reloaded the drivers.

I'll need to take the printer to a friends house to test on another
PC.
Watch this space.


--
Castagnola
Posted via http://www.vistaheads.com

OK.

I tried the printer on another PC - no response from the PC at all.
returned the printer to the shop as it was still under warranty, an
they replaced it with a new one which fired up as soon as I plugged i
into my PC.

Thankyou for the advices - I really thought it was Vista playing up.

For all readers - only the USB had gone down on the Lexmark X3650; al
other inputs eg PictBridge, SD card, Flashdrive etc. and th
scan/copy/print functions were OK. The printer itself reported n
failures.

Happy Printing

--
Castagnol
Posted via http://www.vistaheads.co