Reply to thread

Message

[QUOTE="mwg42, post: 233788, member: 29827"]
I have an aggravating problem with my Brother HL-L3290CDW.

I am using the printer on Linux, and things changed. One day, everything was working. Print, scan, etc.

The next day. Almost all network related functionality had vanished.

The printer can get an address via DHCP. The printer web page doesn’t work.

Print utilities can discover the printer, but cannot print.

I connected the unit to USB. The scanner interface is visible, no additional printer interface is visible.

All scanner programs I have tested so far but one can see the scanner, but cannot scan. They just do nothing. No scan, no error.

Xsane produces the following error after the printer actualy seems to scan. About 3 minutes later; this pops up:

Failed to open device ‘Brother4:bus4;dev11’
Error during device I/O

When scanning on USB, Xsane says this immediately:

Error during read. Error during device I/O

The only network related feature that I can make work is printing, and that only by manually setting up LPR/LPD printing.

Does anyone have any ideas as to what might be happening here?
[/QUOTE]

Verification