Reply to thread

Message: [QUOTE="pixels, post: 208462, member: 9445"] Ok, getting somewhere now, though still perplexed! You can imagine my shock when I went to print some more blank invoices, paper for which is in trays two and three [standard 80gsm A4 in tray 1], with duplex in the driver set to 'use printer settings' which I thought was 'Duplex - off', but the first oddity I noticed was that the 1st sheet was being delivered to the top [standard bin] instead of out the end [bin 1], but then instead of dropping into the standard bin, it was reversed back into the machine to go through the duplexer!! 'What the!!!' I've since discovered that duplexing works fine from trays 2 and 3, but not from tray 1?????? So at least I have a workaround now, I can simply put the bond A4 into tray 2 and duplex from there. But what the heck's the matter with tray 1???? The printer was set to duplex on [my fault] which explains why it started to duplex the invoices. Setting the printer back to duplex off restored 'on' control to the driver, which is the best way as you then have a simple mouse click right underneath to choose long edge or short edge duplexing. Fixing that setting didn't fix tray 1, that still won't duplex???? odd?????? [/QUOTE]