Reply to thread

Message: [QUOTE="davidparker, post: 232872, member: 22563"] Hey, If you can see yellow on the ITB during calibration but not on the print, it’s likely the yellow toner isn’t transferring from the belt to the paper. Check the [B]transfer roller[/B] and make sure it’s clean and seated properly. Also double-check the [B]yellow drum and contacts, [/B]sometimes after working on the solenoid, a connection or spring doesn’t sit right. If all looks good, try running a few [B]full-color cleaning pages [/B]or a “diagnostic print” from service mode, it can help re-sync the transfer. — David [/QUOTE]