Reply to thread

Message: [QUOTE="vjbelle, post: 220514, member: 18728"] My ipf8400 has a banding issue but only with the leading edge of the paper - disappears after about 1/2 to 1 inch. I have been printing on Epson Exhibition Canvass for years and have never seen this until recently. I've tried most everything including registering a new paper in Media Configuration Tool (a new name but same paper) and ran all of the calibrations required but the banding persists. Print heads give a perfect nozzle check. My usual print size is 48 X 27-30. My prints are mounted museum wrap so the leading edge is very important. Any help appreciated. Victor B. [/QUOTE]