HP C5180 BLACK 363 level of ink reset - SUCCESS!!!

Discussion in 'Hewlett Packard' started by lukasz.lamza, Feb 18, 2009.

  1. lukasz.lamza

    lukasz.lamza Guest


    I accidentally managed to fool my HP Photosmart C5180 printer to
    accept a refilled black 363 ink after the "Empty ink" blockage. I'm
    not quite sure what did I actually do, so what follows is more like a
    description of the circumstances in which it happened rather than a
    method. I am absolutely not a professional and I take no
    responsibility for anything you might do with your printer by
    following my steps.

    Anyway, the basics:

    1. There's a "secret" menu which you enter by pressing the "<" (left)
    button and the "Settings" button at the same time.
    2. You move through the menu with <, >, X and OK buttons.
    3. Enter the menu, press OK (something like "Support R0631M" should
    4. Scroll to "System configuration menu" and choose "hardware failure
    status", press OK, and "Press OK to clear". You will be prompted that
    the status were cleared and the printer may buzz for a while, possibly
    adjusting the inks or something.
    5. NOTE: The procedure above is actually the standard way of dealing
    with the "Ink system has failed. Error:0xc18a0001" thing. ->

    So it all started with me randomly unplugging and plugging the
    refilled black ink until I got the 0xc18a0001 error; I googled the
    thing, did the hardware failure status clearing, then tinkered some
    more with the "secret menu" options, then manually unplugged the
    machine while it was doing some sort of servicing procedure I let it
    do from the "servicing menu", then turned it on and had ANOTHER
    0xc180001 error, removed it with the abovementioned method and... it
    all started to work and is now smoothly printing everything (of course
    every time I turn on the machine it shortly informs me that I'm a
    psychotic bastard by using refilled HP inks, but it doesn't affect the
    printing process). In the meantime I also tested all resetting methods
    found on the internet, like pressing the X button for 5 seconds,
    pressing the ON button and unplugging at the same time etc. - so
    selecting the important from unimportant factors in my 2 hour oddysey
    is beyond my copmprehension.

    OK, so I know it's all quite messed up - and it's simply because from
    my perspective it was like a random miracle. The only reason I'm
    writing this down is to spread hope - it seems that YES, it IS
    possible to fool the damn printer. It's definitely NOT bullshit, the
    brute fact of the matter is that yes, I had my black ink refilled,
    yes, I encountered the popular "you-can't-fool-HP" problem, and yes,
    everything now works like a charm. Beats me too.

    Maybe someone more clever than I will figure out from my adventures
    what have REALLY happened? Keep trying folks!

    BTW, in the abovementioned menu there's a place where you can check
    your inks' serial number and their status (Information menu->pen
    supply serial number (SN) and Information menu->pen supply level of
    ink (LOI) ). Before my trick the black ink serial was probably the
    same it is now (curse me, I didn't write the number down), but the LOI
    status HAS changed from "empty" to "OK". So, to put this all short:
    there definitely IS a way to change the LOI status of an ink by
    following SOME procedure not involving taping any contacts on the ink,
    using professional ink resetters etc., e.g. purely from the level of
    the control board of the printer. I'd be as happy as you to find out
    what could it be.

    lukasz.lamza, Feb 18, 2009
    1. Advertisements

  2. lukasz.lamza


    Mar 1, 2017
    Likes Received:
    I tried to follow your steps but I suddenly got a message WRONG CARTRIDGES put the initial cartridges that followed your printer!! Now wht do I do as I dont have these ld cartridges?
    Akin, Mar 1, 2017
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.