Oce Arizona 250gt

Joined
Jan 28, 2025
Messages
1
Our old but well maintained 250GT now has a strange printing issue. We had Canon replace the two yellow print heads recently and immediately had an issue where the yellow ink starts to drop out after printing about 30 - 45 cm of a full bed with heavy yellow coverage.
If you stop the print and do a nozzle check it is fine. Somehow the yellow printheads are getting ink starvation while printing?
We did notice that when the machine is idle the ink meniscus level on the popup ink screen fluctuates from 12.1 down to 10.7 and then back up to 12.1.
The Canon techs were in for several days trying to find a fix with no luck.
Ink filter has been changed and meniscus filter changed.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top