Reply to thread

Message: [QUOTE="Per Lind, post: 226847, member: 23424"] Hello, Im from Sweden and new here. Should try to explain my problem. In the print setup, I have specified landscape, two-sided, rotate 180 degrees, edge-to-edge with folding to A5 and 2 staples, which gives a booklet in A5 with page 1 borderless and the left edge with a white margin. On the back I get a white border of about 3-5 mm on both sides. I go into setup: Yellow button, 107 + C until setup opens. Question 1: The pressure on the front is adjusted in 1001.2 and 1002.3, but where is the pressure on the back adjusted? Question 2: I use 2 staples in the back of the booklet. With 6134.3, the upper position of the stapler is adjusted. Can you adjust just the lower one? Where do I find this adjustment? [/QUOTE]