Win32 error code

Discussion in 'Windows 2000 Printing' started by LW_Greeney, Jul 17, 2007.

  1. LW_Greeney

    LW_Greeney Guest

    We have currently just started to get a problem with our plotters, we are
    unable to print to our plotters from any program except Autocad 2006. When
    ever we print even from adoebe reader we get an error in the server event log
    of :-

    "The document ECP189-M-3003-P8 Ventilation Third Floor.pdf owned by
    Administrator failed to print. Win32 error code returned by the print
    processor: 119 (0x77). "


    This also happens from Word, notepad, wordpad etc.

    Does anyone have any ideas what the cause of this problem.
     
    LW_Greeney, Jul 17, 2007
    #1
    1. Advertisements

  2. E:\>winerror 119
    119 ERROR_BAD_DRIVER_LEVEL <--> No NTSTATUS matched

    what print processor is the device using?

    --
    Alan Morris
    Windows Printing Team
    Search the Microsoft Knowledge Base here:
    http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto

    This posting is provided "AS IS" with no warranties, and confers no rights.

    "LW_Greeney" <> wrote in message
    news:...
    > We have currently just started to get a problem with our plotters, we are
    > unable to print to our plotters from any program except Autocad 2006. When
    > ever we print even from adoebe reader we get an error in the server event
    > log
    > of :-
    >
    > "The document ECP189-M-3003-P8 Ventilation Third Floor.pdf owned by
    > Administrator failed to print. Win32 error code returned by the print
    > processor: 119 (0x77). "
    >
    >
    > This also happens from Word, notepad, wordpad etc.
    >
    > Does anyone have any ideas what the cause of this problem.
    >
     
    Alan Morris [MSFT], Jul 18, 2007
    #2
    1. Advertisements

  3. LW_Greeney

    Dieter Guest

    I have found one relevant position in the DDK sources in enable.c (msplot):

    BOOL DrvEnableDriver(
    ULONG iEngineVersion,
    ULONG cb,
    DRVENABLEDATA *pded
    )
    {
    PLOTDBG(DBG_ENABLEDRV, ("DrvEnableDriver: EngineVersion=%08lx,
    Request=%08lx",
    iEngineVersion,
    DDI_DRIVER_VERSION_NT4));

    //
    // Verify the Engine version is at least what we know we can work with.
    // If its older, error out now, as we don't know what may happen.
    //

    if (iEngineVersion < DDI_DRIVER_VERSION_NT4) {

    PLOTRIP(("DrvEnableDriver: EARLIER VERSION:
    EngineVersion(%08lx) < Request(%08lx)",
    iEngineVersion,
    DDI_DRIVER_VERSION_NT4));

    SetLastError(ERROR_BAD_DRIVER_LEVEL);
    return(FALSE);
    }


    I think you should delete the drivers for the plotter and reinstall them.

    Dieter

    > E:\>winerror 119
    > 119 ERROR_BAD_DRIVER_LEVEL <--> No NTSTATUS matched
    >
    > what print processor is the device using?
    >
     
    Dieter, Jul 18, 2007
    #3
  4. Dieter, you are great.

    --
    Alan Morris
    Windows Printing Team
    Search the Microsoft Knowledge Base here:
    http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto

    This posting is provided "AS IS" with no warranties, and confers no rights.

    "Dieter" <> wrote in message
    news:f7ka12$bas$03$-online.com...
    >I have found one relevant position in the DDK sources in enable.c (msplot):
    >
    > BOOL DrvEnableDriver(
    > ULONG iEngineVersion,
    > ULONG cb,
    > DRVENABLEDATA *pded
    > )
    > {
    > PLOTDBG(DBG_ENABLEDRV, ("DrvEnableDriver: EngineVersion=%08lx,
    > Request=%08lx",
    > iEngineVersion,
    > DDI_DRIVER_VERSION_NT4));
    >
    > //
    > // Verify the Engine version is at least what we know we can work
    > with.
    > // If its older, error out now, as we don't know what may happen.
    > //
    >
    > if (iEngineVersion < DDI_DRIVER_VERSION_NT4) {
    >
    > PLOTRIP(("DrvEnableDriver: EARLIER VERSION: EngineVersion(%08lx) <
    > Request(%08lx)",
    > iEngineVersion,
    > DDI_DRIVER_VERSION_NT4));
    >
    > SetLastError(ERROR_BAD_DRIVER_LEVEL);
    > return(FALSE);
    > }
    >
    >
    > I think you should delete the drivers for the plotter and reinstall them.
    >
    > Dieter
    >
    >> E:\>winerror 119
    >> 119 ERROR_BAD_DRIVER_LEVEL <--> No NTSTATUS matched
    >>
    >> what print processor is the device using?
    >>
     
    Alan Morris [MSFT], Jul 18, 2007
    #4
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.