ink cartridge installation

Joined
Feb 1, 2020
Messages
1
I have just purchased a new HP Deskjet 3752 all-in-one printer. I'm trying to set it up but cannot install the setup cartridges. It says to insert and push gently for them to snap into place. They don't snap into place. I'm afraid to push too hard in case I break something. Is there a trick to insertion?
 
Joined
Feb 2, 2020
Messages
42
Other than removing the tape and inserting them right side up there no trick to installing them.
 
Joined
Feb 4, 2020
Messages
2
I installed my ink cartridge incorrectly, now the ink cartridge does not lock when I push it into the slot. I think the slot is locked in. Can anybody help me find a way to unlock the slot for the ink cartridge so I can install it correctly? I've replaced my ink cartridge many times before but this time I pushed it in incorrectly. Thanks
 
Joined
Feb 2, 2020
Messages
42
Since the printer is new I would contact HP directly for help. It likely says how to do that somewhere in the manual or on their website.
 
Joined
Feb 4, 2020
Messages
2
Since the printer is new I would contact HP directly for help. It likely says how to do that somewhere in the manual or on their website.
Thanks for your advice. Unfortunately, nothing is written about it in the manual or website.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top