Reply to thread

Message: [QUOTE="totfit, post: 119564, member: 920"] Is it possible that the printer had its IP address changed through DHCP? Pull a network config page from the printer and check the IP address. See if it is different from the IP address you have listed in the port settings for the printer installation. If it does you can either set a manual IP address for the printer that is that same as the installed IP or create a new port with the IP address of the printer and change to that. The Apple may not be printing to an IP address as the PC's are most likely printing. There are really many ways to set the printer up on a PC, but I bet that for now the IP address has changed on the printer and it will not communicate with the PC's until remedied. [/QUOTE]