Epson P600 error message

[Photohonesty]

Hi Everyone I have an issue with my Epson SCP 600 I need to print something by tomorrow. There was a paper feed error and now when I turn it on shows error 0x61 and to consult documentation. But then the documentation makes no reference to error codes. Can anyone help identify the problem and ideally a fix for it? Thank you.

 

[ruffin]

Be sure no paper jams and you have proper paper to print.
Then disconnect power cable from wall outlet for two minutes.
Reconnect power cable and try printing again.
Regards

 

[ruffin]

Forgot to say
Be sure paper edge guards not tight against paper in paper tray.
Should be slight clearance between guard and paper stack.

 

[Photohonesty]

Thanks there was a paper jam previously but I cleared it - i’m thiinking there may be dust or fibres still in there do you have any suggestions re removing them? Thank you very much for your help Graham

 

[ruffin]

Try disconnecting power cable to see if that will clear error message.
If your previous jammed paper was cleared intact, then should be ok.