Kyocera 4550ci (DF 7120) finisher and staple issues

Joined
Feb 28, 2024
Messages
5
I have never used the staple or the finisher so I thought it was the time to do it but when I try it came up a tex message.

Cannot use Staple due to a failure and Cannot use finisher functions due to failure.

I have disconnected the finnisher and connected it agail but the same issue so I was wondering what the issue can be, it has no sound or even go up and down.

Well I am no expert and I just want to know what I can do to fix it, thanks

The finisher is called Kyocera DF 7120
 

Attachments

  • 2024-02-22 13.11.13.jpg
    2024-02-22 13.11.13.jpg
    192.2 KB · Views: 10
  • 2024-02-22 13.11.35.jpg
    2024-02-22 13.11.35.jpg
    195.9 KB · Views: 11
Joined
Feb 28, 2024
Messages
5
I just want to say that I pushed the button on my panel Status and I have a Kyocera 4550ci, and I put in these numbers Maintenance mode - Enter “10871087” using the numeric keys

After this I got to U906 and pushed enter and enabled the finisher and now it works like a charm, but first after a restart. thanks

I found the aswer here

Best regards /R

https://www.copytechnet.com/forums/newreply.php?do=newreply&p=2584756
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top