MB760 - Unknown Status Message?

Joined
Sep 8, 2017
Messages
2
Hi

I just reinstalled a ADI Hard Drive in a mb760, and I wasn't 100% sure what I was doing on the [08] Settings Mode - Initialization of the Printer.

I somehow got all the functions working again, but there is this Service Mode Message at the bottom left hand corner.

Does anyone know what this means?

The printer also gets a F070 Error upon starting itself up if I try to select any mode (Options: Settings mode, normal mode, test mode, adjustment mode) in [08] Settings Mode, unless I manually start it.
 

Attachments

  • Service Mode.jpg
    Service Mode.jpg
    100.4 KB · Views: 271
Joined
Sep 8, 2017
Messages
2
Solved the problem.

SRAM was initialized to 20ODA instead of 30ODA.

SRAM has to be initialized to the settings of the provider who distributed the printer.

I just Cleared the SRAM in 6C mode or 3C mode, Boot in 08 Settings Mode, Set to 30-ODA (Australia) , then Initialized with 08-9030, and it was all good. Just remember to save your settings in a clone file & backup your files before you initialize.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads


Top