need help

[Bob Rayyan]

Dear All
I have a problem with Ricoh c751, a rat bite some wire sc 530 error code appear while I looking for all wire, but I found nothing, appreciate any help.

 

[Meredith098]

It sounds like the SC530 error could be linked to the damage caused by the rat. Even if you can't see visible damage, the wires could still be internally damaged or disconnected. SC530 usually indicates a fusing unit issue, which could be a result of the wire problem. I'd recommend double-checking all wire connections, especially near the fusing unit, and if the issue persists, it might be best to call a technician for a deeper inspection. Rats can sometimes damage things that aren’t immediately obvious!

 

[UpAndPrinting]

A rat bit some wire but you can't find a wire that's bit?

Anyways, here's your error code:

 

[Bob Rayyan]

It sounds like the SC530 error could be linked to the damage caused by the rat. Even if you can't see visible damage, the wires could still be internally damaged or disconnected. SC530 usually indicates a fusing unit issue, which could be a result of the wire problem. I'd recommend double-checking all wire connections, especially near the fusing unit, and if the issue persists, it might be best to call a technician for a deeper inspection. Rats can sometimes damage things that aren’t immediately obvious!

Thanks for response, is this error code sc 530 related to some parts exactly or may it different place

 

[Meredith098]

SC530 usually points to the fusing unit, but wiring damage could be involved. Check connections or consult a technician

 

[Bob Rayyan]

SC530 usually points to the fusing unit, but wiring damage could be involved. Check connections or consult a technician

Hi
I make deep checking while I found some wire bitted by the rat, and welding them to gather, but the same code still persist.
any help

 

[Meredith098]

Since you’ve fixed the wires but the SC530 error still shows, it could be related to the fusing unit or hidden damage. Try checking all connections again and inspect the fuser parts like the rollers and thermistors. If the issue persists, a technician may need to take a closer look.

 

[Bob Rayyan]

Since you’ve fixed the wires but the SC530 error still shows, it could be related to the fusing unit or hidden damage. Try checking all connections again and inspect the fuser parts like the rollers and thermistors. If the issue persists, a technician may need to take a closer look.

thanks alot