Epson L5190 It is nearly time to reset the ink levels

Joined
Sep 9, 2020
Messages
1
One of my client refill an ink to L5190 using ink 664 instead of ink 003. Then when try to print the black print output is not good. When I'm trying to ink flash an error appear saying "It is nearly time to reset the ink levels".
 

Attachments

  • 118994456_312429600039007_5378941833691577784_n.png
    118994456_312429600039007_5378941833691577784_n.png
    33.6 KB · Views: 198
Joined
Sep 7, 2020
Messages
12
Visually check the ink levels in the product’s ink tanks to confirm the actual ink levels. Continued use of the product when the ink is expended could damage the product.
  1. Press the Home button, if necessary.
  2. Press the up or down arrow button to select Setup > Maintenance > Reset Ink Levels.
  3. Press one of the Start buttons, then press the OK button.
  4. Press the OK button again.
  5. Press the right or left arrow button to highlight the ink tank you refilled, and press the OK button to select it. Repeat for each ink tank color you refilled.
  6. Press one of the Start buttons to reset the ink levels, then press the OK button when the reset is complete.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top