Brother DCP-L3550cdw has quality problems with compatible toner, original toner is OK

Joined
Dec 14, 2021
Messages
3
Hi

I have been troubleshooting issues I have observed for some time with compatible toners from vendor in DK. So far two issues have been found:

1. Compatible magenta was OK originally, but has turned pale red after a few pages. Tried 2 compatible magenta toners – same issue. When replacing with original magenta, issue goes away.

2. Horisontal lines in all but red and yellow, probably due to compatible cyan toner. Also tried 2 compatible cyans. Have not yet tried original cyan.

Printer is appr. 1 year old and has only been printing around 2000 pages in total.
Any suggestions?
 

Attachments

  • Scan2021-12-11_110340.pdf
    756.6 KB · Views: 18
  • extract.jpg
    extract.jpg
    38.9 KB · Views: 13
Joined
Dec 14, 2021
Messages
3
First step I will try before switching to original toners, is to use colori toners of higher quality than standard compatible toners.
I remember that I had similar issues with my HP CM1312 printer before switching to colori toners.
 
Last edited:

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top