Canon PIXMA MP800 Error 6A00

Dec 9, 2011
You can make an attempt to free the printhead by doing the following;

1. With the power off, open the top cover.
2. Turn the power on and as the unit attempts to perform the initial test cycle, gently pull on the carriage assembly to see if it will move to the left. If you get no response. Turn the power off.
3. Now, turn the power on and gentley push on the carriage assembly to the right in an attempt to take the pressure of the of carriage and free the jam.

If neither of these work, then you are left with no other choice than to take the printer apart and get at the locking mechanism and free the carriage so it can move away fromt he purge unit and help you to locate the probable jam in the purge unit.

Trung tâm máy in Cường Phú hân hạnh được cung cấp các thiết bị văn phòng..chính hãng..chất lượng tốt..giá cả hợp lý


Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question