HP m 1005 Torn fuser film plus jam in paper print path

H

hello12345

Joined
Jul 12, 2018
Messages
3
I lost seventy percent of my sanity yesterday when i had to open my hp m1005 laser printer upto the fuser unit. The printer was not printing properly at the sides. I found buildup of large toner blobs on the side of the fuser unit. The fuser film is slightly torn at the sides also.

I cleaned the toner blobs up and reassembled the printer. It printed one page and after that gave an error "jam in print paper path" that won't resolve. Obviously the torn fuser film needs replacing but is this error related to the torn fuser or to some other sensor?
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Hp m1005 Print done Ok but Scan Copy print in dark page 0
Fuser not getting hot enough hp m 1005 1
HP P1005 paper jam 1
Error message 0001005 appears on an Epson Stylus Pro 9800 1
printer HP LaserJet P1005 window 10 driver problemH 3
Epson LQ2190- paper torn at the upper and corner each time printing 0
Problem loading paper hp laser m1005 MFP 1
HP P1005 vs Samsung ML-1640 2

Top