HP m775dn phantom fuser wrap jam.

Discussion in 'Printer Discussion' started by Pjmud, Feb 11, 2019.

  1. Pjmud

    Pjmud

    Joined:
    Feb 11, 2019
    Messages:
    3
    Likes Received:
    0
    I'm working on HP m775 that has fuser wrap jams occurring often. Paper stops with lead Edge just out of the fuser. Delivery assembly has been replaced. Fuser has also been replaced. Paper is not crashing or wrapping. Has anyone had this problem?
     
    Pjmud, Feb 11, 2019
    #1

    1. Advertisements

  2. Pjmud

    ruffin

    Joined:
    Dec 7, 2016
    Messages:
    983
    Likes Received:
    51
    Location:
    Florida, USA
    Check paper thickness versus machine requirements
     
    ruffin, Feb 11, 2019
    #2

    1. Advertisements

  3. Pjmud

    Pjmud

    Joined:
    Feb 11, 2019
    Messages:
    3
    Likes Received:
    0
    customer has identical machine in the same room, same paper same setup. No issues at all with other machine.
     
    Pjmud, Feb 12, 2019 at 12:45 PM
    #3

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. phantom jam in Kyocera FS600/manual

  2. HP LaserJet 2550n phantom paper jam

  3. replace hp lj4 fuser with lj4+ fuser?

  4. wrap a row

  5. Wrap in Segments?

  6. HP cp2025 phantom jam

  7. Xerox 7400dn Fuser Jam, already replaced fuser / duplexer.

  8. Epson BX525WD Phantom Paper Jam

Loading...