Lexmark e232 problem with install second motherboard

Discussion in 'Printer Repair' started by jorkata785, Oct 1, 2019.

  1. jorkata785

    jorkata785

    Joined:
    Oct 1, 2019
    Messages:
    1
    Likes Received:
    0
    Hello colleagues,

    I have Lexmark E232. When i was printing normal, next day the printer stop recognize by the computer, nor USB nor Parallel.
    I've try 4 different laptops and pc's to connect the printer with 3 diff usb cable, lpt cable and lpt to usb, but with all of them is the same.
    I can print Test page from the button of printer!

    I've buy another one printer and try with change motherboard, but is the same problem with two ports.(the person from, which i've buy the printer told the printer working and the lpt port working)

    I want to know if Lexmark has that problem, or anybody have the same problem? (it is old model printer, BUT it is Very Strong!)

    Where can be the problem in the motherboard, it says that have some connection to the board with pc, but cannot recognize?
    Is it some of the chips?

    Do we can install LAN port to that board?

    Board model : Lexmark 12-00469-00D

    Regards,
    Georgi
     
    jorkata785, Oct 1, 2019
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.