Lines on EPSON STYLUS: SX535WD

Joined
Jun 15, 2019
Messages
1
Hello,

Since the last few months i've been having lines when i print.
There are parts that are less visible because of it.
Also, my printer cannot print black anymore, its grey.
Anyone have an idea how I can fix this?

Thanks in advance,
Zeno
20190615_100005.jpg
 
Joined
Jun 14, 2019
Messages
1
Unfortunately I think you have damaged print heads. Try cleaning them by putting the appropriate cleaning solution on a high GSM paper and holding it on the print head for a bit to completely soak the heads with the solution.
Don't scrub it but gently massage in very small circles to loosen any ink build up. Then put some cleaning solution onto a piece of you standard copy paper about 25 mm wide but down from the top edge by about 100 mm and pass this through the printer under a cleaning cycle.
If all that fails you will need a new head. Sorry
Cheers BronwynH
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top