Servicing Laserjet 6p in difficult circumstances

Joined
Aug 10, 2007
Messages
2
I am not in a country where HP engineers are available, but I have a basic knowlege of electronics, have built radios etc. When I switch on my printer (HP Laserjet 6p - model number C3980A) it does not power up, and it displays a fixed amber led light.(nothing else). Using the Service Manual for this model, I have successfully removed the Formatter PCA, the Fusing Assemblies and the DC Controller Assembly board. Checking the connector socket on which the motor assembly rests (J601), using a volt/resistence-meter, I cannot locate any current - there is no power reaching the motor. The main fuse fh101 is not blown. What else should I check?
 
Joined
Aug 10, 2007
Messages
2
servicing hp laserjet 6p in difficult circumstances.

I got it done. Discovered that a flag was out of place and was able to fix it.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top