workcentre pro c2636 communications encountered problem

Joined
Mar 2, 2010
Messages
1
I turn on the printer and after a few minutes on the display I see this error encountered communications problem, reset system by turning power off, then on, using the white power switch.
 
Joined
Sep 30, 2009
Messages
22
Hi,
It could be that the network controller need to be reset.
You could log as admin (key button) and go to Software reset > reset both.
Advise you to print a config report before. If possible.
Hi,
It could be that the network controller need to be reset.
You could log as admin (key button) and go to Software reset > reset both.
Advise you to print a config report before. If possible.
xxx.support.xerox.com/SRVS/CGI-BIN/WEBCGI.EXE?St=453,E=0000000001955886051,K=1314,Sxi=0,Case=obj(8986)

Note you need to add the correct link form.
hope it helps
L.

hope it helps
L.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top