Xerox 7400dn Fuser Jam, already replaced fuser / duplexer.

Joined
Jan 14, 2015
Messages
2
Currently I'm working on a Xerox 7400dn with a fuser jam whenever the printer is duplexing, and occasionally when printing single sided. The jam occurs after the fuser in the exit gate assembly. The exit gate solenoid fails the on board solenoid test available.

A previous technician has replaced the fuser and the duplexer, thinking these to be the problem. After running the tests on the solenoid I ordered an entire exit gate assembly and replaced that. Even after replacing the whole exit gate assembly (which includes a nice and new exit gate solenoid) the exit gate solenoid fails testing.

I'm really not sure where to go on this now. Any help would be appreciated.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top