Brother MFC-9420CN PF KIT2 Reset

Dec 14, 2013
Can anybody help me with resetting the counter for the supply item PF KIT2, I have tried everything I can find on the internet but am not able to get into the reset mode which from what I have read tells me to press 3+9 at the same time. The instructions sound so simple but they have gotten the best of me. Thank You Randy
Last edited:
Dec 17, 2013
(1) Press the 3 and 9 buttons at the same time in the ready

(2) The “Reset Menu” will appear on the LCD. Select the
applicable periodical replacement part by pressing the up arrow or down arrow button and press the OK button.
< Periodical replacement parts are indicated on the LCD >
- Drum - Belt Unit - PF KitMP - PF Kit1
- PF Kit2 - Fuser - Laser

(3) When the OK button is pressed the “1. Reset 2. Exit”
appears on the LCD. Press the 1 button if resetting the
counter. If not, press the 2 button.

(4) Pressing the 1 button accepts that the machine implements
the counter reset.

(5) If the 2 button is pressed the machine goes back to the
select part counter again. If you need to Exit press the
Stop/Exit button at any time.

(6) The machine returns to the ready status.

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question