Epson Stylus SX235W problem with black ink

Discussion in 'Printer Repair' started by Cloggen, Aug 8, 2013.

  1. Cloggen

    Cloggen

    Joined:
    Aug 8, 2013
    Messages:
    1
    Likes Received:
    0
    Hello guys,
    I have a problem with only black ink in my printer. The best to describe will be attached picture. It doesn't occur with other inks. It may be helpful if I say that I used non-original inks. However it never happened before. Any suggestions what is the problem?

    Greetings and thanks in advance.
     

    Attached Files:

    Cloggen, Aug 8, 2013
    #1
    1. Advertisements

  2. Cloggen

    Rihac

    Joined:
    Aug 8, 2013
    Messages:
    6
    Likes Received:
    0
    Hi Cloggen,

    I'm a technician that is currently working at rihac. When you say you are not using original inks are you using compatible cartridges or a CISS? If it is a CISS make sure that the cartridges are full of ink and if needed re-prime the cartridges. Have you tried to run a few head cleans to see if that clears it up at all? I would be leaning towards it being blocked as the print seems to fade slightly as it goes on but that may just be the scan.
     
    Rihac, Aug 20, 2013
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.