Epson WF-2540 dead?

D

dlw

Joined
Jun 24, 2018
Messages
1
I have a WF-2540 that has been in use for several years. The other day I was running 'head cleaning' and in the middle of the sequence the printer went dead. Nada. The on/off button does nothing. No sign of life anywhere.

I was able to check the power supply and it is fine - putting out 42 volts as it is supposed to.

Is there a fuse or some other trigger that could cause the printer to become catatonic?

More to the point, can it be fixed??

TIA for any advice.
 
robinhood

robinhood

Joined
Sep 10, 2013
Messages
53
check the FFC cable going into your panel unit board from the main board, if there is lose connection or ends of the cable is worn you wont get power to turn on the printer.. I am not sure but there is one or two fuse locations
on the main board fuse 1. and fuse 2.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

epson wf-2540 printer will not print or barely prints 0
Epson WF-2540 paper loaded, says no paper 1
Epson WF-2540 won't print 0
I have a Epson Workforce WF-2540 2
Epson WF-2540 Fatal Error 0
Replaced Epson WF-2540 Ink Cartridge, still says "empty" 0
EPSON WF-2540: Not printing correctly. 2
Epson W-2540 just as a scanner head 0

Top