- Joined
- Jan 12, 2020
- Messages
- 1
Hello,
I have refilled my HP 678 cartridge for the first time. In doing do, i performed the following steps:
I have even tried pulling the label up from one of the holes to allow unrestricted air passage into the cartridge. But no breakthrough.
When put/rubbed against a napkin, ink flows out of the cartridge smoothly and from the entire width of the printhead.
Any suggestions?
I have refilled my HP 678 cartridge for the first time. In doing do, i performed the following steps:
- Took the cartridge out of printer.
- Removed the cartridge label.
- Dropped the ink slowly & gradually onto the sponge (instead of injecting it in order to avoid physical damage to sponge)(motivated by the mechanism of Continuous Ink Supply System (CISS)).
- Pulled back some ink when the cartridge began to overflow.
- Put the cartridge label back on top of the cartridge.
- Put back the cartridge into the printer and tried taking printouts the next day.
I have even tried pulling the label up from one of the holes to allow unrestricted air passage into the cartridge. But no breakthrough.
When put/rubbed against a napkin, ink flows out of the cartridge smoothly and from the entire width of the printhead.
Any suggestions?
Last edited: