Laser printer will not print proper size

Discussion in 'Printer Repair' started by Kevin Stephen, Jun 27, 2017.

  1. Kevin Stephen

    Kevin Stephen

    Joined:
    Jun 27, 2017
    Messages:
    1
    Likes Received:
    0
    My Samsung ML-1630 has a problem printing an object the right width. If I print a 5" square, the output is 5" tall x 5 1/16" wide. The error is always perpendicular to the paper feed direction. That would be the horizontal. I have the latest driver, Win 10 & the print settings are for 100% & not fit to page. I get the same result printing from PDF or CorelDraw x8. I am 87% sure this was not a problem when the printer was new & I have no idea when it started. I have always printed templates for making parts & only recently noticed the problem. Anything in the verticle is spot on, it's just the width that is wrong.
    Kev
     
    Kevin Stephen, Jun 27, 2017
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
There are no similar threads yet.
Loading...