Minolta Magicolor 1600W will print *once* per reboot.

Joined
Sep 7, 2012
Messages
3
I bought a Minolta Magicolor 1600W and noticed an issue since the first moment I installed it. The printer works beautifully, but only for one print job. After that, the computer acting as the print server must be rebooted.

After the first print, it will continue to accept and even process print jobs as if they were actually printing. It does not show an error, it just does not show a paper either! The motor does not run after the first print job so it is not a mechanical error.

I've tried it on various OS hosts: Windows XP (32 & 64 bit), Windows 7 (x64), Windows 2008 R2 (x64) & Ubuntu 11.10 (32 bit). The results are the same, so I am convinced that the problem is in the printer.

Thoughts?
 
Last edited:

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top