Very poor inkjet print quality (Epson WF7610)

Joined
Nov 22, 2016
Messages
1
Hi all,

Thought I'd come to the experts to find out where to start.... This printer is just over a year old, and print quality has been getting pretty bad (was never perfect).

img1.jpg
img2.jpg


FYI I've already
  • tried different settings (i.e. disabling fast print etc)
  • updated Win10 software and printer firmware.
  • Nozzle check,
  • Cleaned print head
  • Gone through the print head alignment routine
Has anyone got any other suggestions for what may cause such "smudging / blurring". Pages are definitely being left long enough to dry, but seem to be coming out like this. Very hard to put prints in front of other people (i.e. clients)

Any help greatly appreciated :)

Simon
 
Joined
Nov 21, 2016
Messages
2
I have a Printware iJetcolor Inkjet and I get the same problems sometimes. Its always the printhead with mine, so I either soak the printhead in distilled water for awhile and if that doesn't work, then i unfortunately have to replace the printhead.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top