Xerox Workcentre 6515DN Smudging

Joined
Nov 22, 2021
Messages
1
I'm having a weird smudging issues on the right-hand side of every page printed from a Xerox Worcentre 6515DN. I've done the built in drum cleaning within the printer settings with no change. Each of the drums is showing 60% life remaining and the waste cartidge is showing OK. I'm not quite sure what else to try before calling someone in to take a look.

IMG_0653.jpg
 
Joined
Sep 24, 2021
Messages
41
when you ran blank sheets through it cleaned the belt because no toner was being used
when you printed it used toner and the toner adhered to the anomaly on the belt
take out the transfer belt and have look at it
if something on belt clean with a soft cloth with water be gentle they can buckle
if its glue use wd40 then clean off with water
some chemicals in cleaning products can react with the belt
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top