- Joined
- Apr 12, 2024
- Messages
- 5
Wondering if anyone else is experiencing this problem.
I am getting a message on the printer that it has detected a clogged head. The printer often goes into a clean operation before printing. I am not noticing any problem with the resulting prints but I'm going through a lot of ink.
When I run a nozzle check there is no indication of a clogged head. When I run a manual clean it goes through the process to the point of reaching 99% and then gives me a message cleaning failed.
This problem is new and only appeared after I ran the required firmware update because of Epsons change to the ink cartridge. I never had the issue before that.
Printer Epson P6000 Standard edition
Software Epson Print Layout
Computer Mac with 14.2.1 O/S
Any help or suggestions appreciated.
I am getting a message on the printer that it has detected a clogged head. The printer often goes into a clean operation before printing. I am not noticing any problem with the resulting prints but I'm going through a lot of ink.
When I run a nozzle check there is no indication of a clogged head. When I run a manual clean it goes through the process to the point of reaching 99% and then gives me a message cleaning failed.
This problem is new and only appeared after I ran the required firmware update because of Epsons change to the ink cartridge. I never had the issue before that.
Printer Epson P6000 Standard edition
Software Epson Print Layout
Computer Mac with 14.2.1 O/S
Any help or suggestions appreciated.