Pixma Pro 9000 won't power on any more

Discussion in 'Printer Repair' started by AndyStewart, Mar 28, 2020.

  1. AndyStewart


    Mar 28, 2020
    Likes Received:
    Hi there,

    Had a Pixma Pro 9000 for quite a while now (yeh i know, old, not the Mk II).

    Suddenly won't power on any more. Have tested the PSU in a friends Mk2 and it powers his on ok, so not the PSU.

    Tried using Control Panel to power on via USB but no good either.

    Opened printer up, checked everything I can see, no blown resistors etc on any of the boards that I can see, no loose cabling, so a bit stumped what to look for next.

    Any help greatly appreciated.
    AndyStewart, Mar 28, 2020
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.