Invalid IP address - no admin mode access

Discussion in 'Lexmark' started by mascan42, Nov 3, 2018.

  1. mascan42

    mascan42

    Joined:
    Nov 3, 2018
    Messages:
    1
    Likes Received:
    0
    I'm in the process of installing a new MX321. The customer requested that it be setup as a standalone copier/fax with networking disabled, and public users locked out of most setting changes.

    However, due to an incorrect setting, I now can't login to the account I created with admin privileges - "no login method configured" message appears on the control panel. And since I was instructed to set the IP address as 0.0.0.0, the web interface is also inaccessible.

    So, I'm locked out of admin mode, service mode and factory reset mode (again "no login method configured") via the control panel. But when I had access to the web interface, I was able to login to the admin mode there. Is there some way to access the web interface when the IP address is stuck at 0.0.0.0?
     
    mascan42, Nov 3, 2018
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.